Connectic 5 heated gloves Racer 1927

Connectic 5 Connected Warming Gloves: Keep your hands always warm

The Connectic 5 Racer 1927 is a state-of-the-art, multi-purpose heated glove. This glove benefits from the fourth generation of the R-WARM® heating system, with just one button to control both gloves, thanks to Bluetooth technology.

What's more, it features 3 heating levels. Its high-performance insulation guarantees exceptional comfort and a high level of warmth, coupled with a waterproof membrane. The gloves come complete with box, batteries and EU charger.

To optimize battery life, we recommend regular recharging, even when not in use (at least once every 2-3 months).

Gloves can be cleaned using mild soap and a damp cloth. Avoid dry-cleaning, machine-washing and tumble-drying. Do not use bleach or fabric softener.

Connectic 5 size guide

Connecting your heated gloves for the first time

1/ Connect the batteries to the gloves. The right glove, fitted with the button, lights up for 2-3 seconds, then goes out.

2/ Press the button for 10 seconds, until the lights flash violet/purple, then release the button. When the light flashes, the gloves are paired (recognized and connected).

Once pairing is complete, the glove light will turn green. This can take from 2 to 10/15 seconds. It will then switch off automatically. When the light goes out, the pairing procedure is complete.

3/ Disconnect the battery from the glove using the light button.

4/ Reconnect the battery, and you can now operate the heated gloves.

5/ Press the button for 2-3 seconds until the light flashes, then release the button. After a few seconds (2 to 10 seconds), the light stops flashing and stays on (white, orange, red depending on battery charge level). As soon as the light is on and steady, your gloves are working and you can quickly feel the heat.

* if, after 30s, the light is still flashing purple, disconnect the batteries and repeat the procedure.

What to do with the batteries of your heating products during the summer?

The summer season is upon us, and it's time to put away your winter protection, especially your heated gloves. It's time to store them properly to avoid any risk of mishap and to optimize the life of your batteries.

Before storing your gloves, here are a few points to watch out for:

First of all, check your batteries for damage or deformation (swelling). If this is the case, or if in doubt, stop using your battery and recycle it.

Next, perform an almost complete charge/discharge cycle. Charge your batteries to full capacity, then allow them to discharge to a charge level of between 30% and 50%. This level is reached when the indicator on your gloves flashes green.

Finally, batteries should be stored in a place that is not subject to high or low temperatures, i.e. between 10 and 25°C. The lower the room temperature, the better the storage conditions (wintering). We recommend that you store your batteries in a metal or PVC box, to limit the risks of runaway, outgassing and ignition.) Regular visual inspection of the battery will help prevent any problems.

Only use the Racer 1927 charger to recharge your batteries. It is designed to charge your batteries and guarantee maximum battery life. When your batteries are no longer usable, dispose of them immediately in a suitable recycling facility.

Take total control of your gloves Racer 1927

Would you like to go one step further? Download and discover the RACER IWARM SYSTEMconnected application. Customize your gloves and monitor your consumption in real time, for optimum comfort and a unique experience. This application is not required to operate your gloves.