Made from 150 g/m² flag fabric, this aviation windsock complies with STNA standards and is also STNA-approved. The polyester fabric is ultraviolet-resistant, increasing its lifespan. It attaches to a wind vane via an eyelet system.
Dimensions: Ø 30 x 120 / Ø 40 x 250 / Ø 60 x 240 / Ø 90 x 360
The STNA orange windsock is designed for use on helicopter runways, airfields and airports on the African continent or in Nordic countries. It complies with ICAO standards, using colors and dimensions standardized for these countries. The polyester fabric is ultraviolet-resistant, so it lasts longer. Its 3-thread braided mesh design limits the risk of tearing. What's more, the windsock is moisture inert and mildew resistant. It attaches to a wind vane via an eyelet system.
The windsock is a device designed to indicate not only wind direction, but also an estimate of wind speed. It consists of a mast, to which a conical fabric sleeve is attached, made up of five rings alternating three red and two white. Each of these colored bands, when the windsock is inflated by the wind, is equivalent to approximately 5 knots or 9 km/h. The sleeve is therefore horizontal when the wind is blowing at more than 25 knots (approx. 45 km/h). This gives an estimate of the wind speed. The dimensions of the windsock are determined by the distance from which it is to be seen.
Paragliders by Certification :
Paragliders by Brand :
Paragliders by Type :
Paraglider Accessories :
Harnesses by Type :
Harnesses by Brand :
Harness Accessories :
Rescue by Type :
Rescue by Weight :
Rescue by Brand :
Rescue Accessories :
Helmets by Brand :
Paramotor Helmets :
Paragliding Bags by Type :
Paragliding Bags by Brand :
Flight Instruments :
Measuring instruments :
Free Flight Radios :
Aviation Radios :
Paraglider Accessories :
Harness Accessories :
Rescue Accessories :
Hardware :
Multi-Function Pliers and Tools
Paramotor Helmets :
Ultralight Aviation Accessories :
Upper-Body Clothing :
Gloves and Inner Gloves :
Please sign in first.
Sign in
English
Français
